• CUO

    Connectivity Unit Offroad

    • CONNECTING TO ANOTHER LEVEL, ANOTHER REALM OF PERFORMANCE.

    The moment has arrived. Elevate your KTM experience with the new Connectivity Unit Offroad (CUO). This unit expands the range of setup and performance options, offering enhanced capabilities. With user-friendly installation and robust hardware, coupled with the opportunities unlocked by the free KTMConnect App, the CUO provides access to an advanced riding experience. Notably, the CUO is a standard feature on the 2024 and 2025 KTM SX-F FACTORY EDITIONS and the 2025 KTM 350 XC-F FACTORY EDITION.

    The CUO is a data and GPS-based two-piece system. The first unit is attached between the front fork and triple clamp and behind a KTM numberplate. The GPS receiver then sits on top of the front fender, when activated, the CUO is synced automatically and instantaneously with a rider’s KTMConnect App (free to download from Google PlayStore or Apple AppStore). Riders can now activate a series of wireless connectivity functions and features to fully customize their KTM for a variety of track conditions and also dissect and improve their on-track performance.

    Connectivity Unit Offroad (CUO)

    Connectivity Unit Offroad (CUO)

    Engine

    Use this menu option within KTMConnect to modify the engine behavior and characteristics of a KTM. Riders have the choice of PRIME, allowing toggling levels of Traction Control, or ADVANCED settings, encompassing engine braking, throttle response, traction control, and launch control, along with the ability to engage the Quickshifter. Moreover, there are pre-configured presets tailored for specific tracks, including SAND, GRAVEL, HARD PACK, DRY, and WET parameters. This enables any rider to swiftly fine-tune the demands of a particular riding session or adjust for individual skill and fitness levels. Additionally, there is a default option to restore the engine mapping to its original state.

    Suspension

    Choosing the SAG ASSISTANT or SUSPENSION SETTINGS tabs in KTMconnect allows for additional customization tailored to a rider's weight, skill level, and specific track or weather conditions. By inputting weight and measurement data, the system generates recommendations for shock preload or spring rates. Furthermore, riders can receive guidance based on their skill level, categorized as BASIC, ADVANCED, or PRO, and specific advice for tracks with varying surfaces like SAND, SOFT, MEDIUM, and HARD. This feature provides comprehensive support for optimizing suspension settings based on individual preferences and riding conditions.

    RIDER

    HIGHLIGHTS & FEATURES

    A valuable collaboration with analysis experts LITPro enhances the RIDER feature on KTMconnect, leveraging the capabilities of the CUO. Through user-friendly software integrated into the app, RIDER not only dissects the motorcycle's performance metrics on a lap-by-lap basis but also provides highly personalized insights for each session.

    • Speed at a specific point
    • Top speed & average speed
    • Acceleration points & deceleration points
    • Lap 99 (theoretical fastest lap) analysis
    • Gear position
    • Engine RPM
    • Throttle position
    • Water temperature in celsius
    • Traction Control
    • Map Selection Mode
    • Heart rate
    • G-Force
    • Jump distance

    Utilizing data on speed, calculations are performed to illustrate a rider's trajectory and offer analytics on every aspect of a lap, facilitating the refinement of the ideal course. Post-ride, riders can share their recordings, enhancing the community experience. Additionally, attaching a heart rate monitor adds another layer of personalization to the RIDER feature. 

    • LAP & SEGMENT TIME - Stay on top of your lap times every ride and examine your performance. Confront your own records head-on or measure up against fellow riders to assert your dominance.
    • SIDE BY SIDE LAP COMPARISON - Compare your laps by overlaying them side by side. This allows you to visually identify where you gained or lost time.
    • ACCELERATION & BRAKING - RIDER reveals your starting point and the intensity of your acceleration or braking. Utilize this information to experiment with various zones and timings.
    • RIDER – COST- is available exclusively through a subscription, which can be purchased annually or monthly. Each subscription includes a free trial. The starting price is €69.99 per year or €11.99 per month, and it can be purchased via the Google Play Store or Apple App Store. Prices may vary depending on the user's country.

    CUO AVAILAIBILITY 

    The CUO is fitted as standard on the following KTM models:

    • 2024-2025 KTM SX-F FACTORY EDITION’s 
    • 2025 KTM 350 XC-F FACTORY EDITION

    The CUO can be retrofitted to the following models:

    • 2024 & 2025 KTM SX-F models
    • 2024 & 2025 KTM XC-F models
    • 2025 KTM 450 SMR

    DOWNLOAD NOW